Befreiungskriege 1813-14

Painting and modelling 28mm Napoleonic wargaming miniatures

Posts Tagged ‘Andrea Miniatures’

Paint-in #6: finishing the Marie Louise

Posted by Martin on September 1, 2013

All around views of the completed Marie Louise from the BfK 2012 Limited Edition set.

All around views of the completed Marie Louise from the BfK 2012 Limited Edition set.

It’s been a long time since the last posting in this paint-in series and rather than spread things thinly by discussing progress across all four figures, I’ve decided to use this posting to discuss the steps I took to complete the Marie Louse infantry figure in the set. The main reason for doing this is that, after a disrupted Summer, I felt in need of the morale boost of getting least one of the figures over the finishing line – painted, varnished, based – the works!

The last time I wrote a paint-in posting, this chap at least had his head, trousers and shoes completed. When I re-commenced work, the first thing that happened was that I decided I wasn’t completely satisfied with the work I’d previously done on the pokalem, so I did some reworking of the blues to make me happier and to get back into the swing of things. Then I moved on to the greatcoat which I decided to paint brown given the amount of grey and blue across the set as a whole. The basecoat was Vallejo German Camo Black Brown (VMC822), first highlight was Vallejo Flat Brown (VMC984) and the the second highlight was Andrea Medium Brown (NAC-46).

After than, it was on to a lot of details, many of which are unexciting so I’ll simply list the paints as follows:

  • White strapping and shako rosette: basecoat – Second Shade (Andrea White Set), first highlight – Base (Andrea White Set), second highlight – Vallejo White (VMC951). For these colours, two thin coats rather than one thicker coat will give a smoother finish.
  • Black for cartridge case and shako: basecoat – Vallejo Black (VMC950), first highlight – Vallejo Dark Grey (VMC994), second highlight – Vallejo Neutral Grey (VMC992), third highlight – Vallejo Light Grey (VMC990). Go sparingly with the final highlight.
  • Brown for the musket and potatoes (!): basecoat – Vallejo Burnt Umber (VMC941), first highlight – Vallejo Beige Brown (VMC875), second highlight – Vallejo Cork Brown (VMC843).
  • Canvas for sack and cloth wrapped round musket lock: basecoat – Vallejo Flat Earth (VMC983), first highlight – Vallejo Ochre Brown (VMC856), second highlight – Vallejo Yellow Ochre (VMC913), third highlight – Vallejo Buff (VMC976), fourth highlight – Vallejo Ivory (VMC918).
  • Brown for backpack and leather strap on water bottle: basecoat – Vallejo Burnt Umber (VMC941), first highlight – Vallejo Cavalry Brown (VMC982), second hightlight – Vallejo Red Leather (VMC818). The piping was done with Vallejo Ivory (VMC918).
  • Brass for shako plate, “N” on cartridge case and musket bands: Vallejo Gold (VMC996) with several pin washes of Vallejo German Camo Black Brown (VMC822). This is one of the rare occasions that I use washing as a technique and the key is the patience to go for multiple very thin washes rather than one or two more opaque ones.
  • Gunmeatal for musket: basecoat – Vallejo Dark Grey (VMC994), first highlight – Vallejo Natural Steel (VMC864).

All the above is pretty regulation stuff. The painting I want to devote some commentary to is the lentille pompom. You can choose different colours according to which fusilier company of a battalion you wish to represent – dark green for the first, sky blue for the second, aurore for the third and violet for the fourth. Normally the lentilles of the first battalion would be solid colour but it was common for those of the other battalions of the regiment to have white centres with the battalion number inscribed on them. For the purposes of the paint-in, I thought it would be instructive for me to tackle the notorious aurore colour because I have seen so many bizarre interpretations of this over the years. Of course, it’s impossible to be prescriptive about this (or any other historical colour) but I took my cue from the meaning of the word – dawn. To my mind that implies that the colour was intended to be the pinky orange of the sky at dawn. With that in mind I used the following paints: base coat – Vallejo Orange Red (VMC910), first highlight – Andrea French Orange (NAC-35), second highlight – Vallejo Sunny Skintone (VMC845).

When you’ve finished all the painting, leave the figure overnight to dry completely before varnishing. There’s a lot written about varnishing and everybody will have a recipe that works for them and gives the desired outcome. I aim for two things: rock solid protection of the paint finish and as matt a finish as possible. With that in mind, I currently follow a three step process, leaving the figure to dry overnight between in each step hidden under a plastic cup to prevent dust and hairs settling on the figure:

First, I paint the figure with Humbrol Enamel Clear Gloss 35 for protection. Second step is to paint with Winsor and Newton Galleria Matt Acrylic Varnish. The reason I do this is not to provide the final matt finish but rather to help me when I apply the final coat of matt varnish which is shiny when wet and I can’t see the spots I’ve missed when painting over the Humbrol gloss finish. The third step is to paint with Revell Enamel Color (sic) Matt 2. For all these products I can’t stress enough the need to follow the manufacturers instructions – especially when it comes to stirring them thoroughly.

Once the final coat of varnish is finished, I now take precautions to avoid handling the figure directly because oils from your fingers will start to add a sheen to the matt finish. So, for the basing steps, I handle figures using a paper towel and then only pick up based figures by their bases (people visiting my house get very dirty looks if they pick up figures by any other method).

For the figures in this set, I promised to sign the bases, so I fortunately remembered to do that before gluing on the figure. The lucky recipients will see the flourish of my initials with the year (2013) in permanent black Sharpie pen on the underside of the base. Having glued the figure to the base and let it set, I built up a thin layer of epoxy putty ( a 50-50 mix of green stuff and Sylmasta A+B putty). When that had set, I applied a diluted coat of PVA glue and dipped the figure in a tray of N-gauge model railway ballast. When dry, I repeated for a second coat of ballast to ensure good coverage and then glued on some individual larger stones. When all the PVA had dried out completely and I was satisfied that there were no loose particles I applied a final light drybrushing of Vallejo Buff (VMC976). And voila, the figure was complete!

Now I’m bracing myself to tackle completion of the second figure. This should be a little more challenging because it’s the drummer with all his Bardin uniform Imperial lace.

Advertisements

Posted in BfK Limited Edition Figures, On the Workbench, Paint and Equipment | Tagged: , , , , , , | Leave a Comment »

Paint-in #5: below the waist

Posted by Martin on April 28, 2013

A variety of white, grey and blue trousers plus boots and shoes weathered with mud.

A variety of white, grey and blue trousers plus boots and shoes weathered with mud.

Sorry, I’ve fallen behind with posting paint-ins, so some of you may have already completed painting yours. Let’s see if I can start to catch up. This session covers painting trousers and footwear with the added fun of painting on my favourite battlefield mud for that grubby campaign look.

Soldiers of the artillery train often wore grey cavalry overalls though there were variations with red stripes on the outer seam. Grey was not the only colour used for overalls: others include cream and a beige shade commonly referred to as Paris Mud. For both my artillery train figures, I kept it simple with the grey. This is built up from a basecoat of Vallejo Dark Grey (VMC994), followed by a first highlight of Vallejo Neutral Grey (VMC992) and a second highlight of Vallejo Light Grey (VMC990).

By 1813, shortages meant that Marie Louises were equipped with trousers in a huge variety of colours from white through to many shades of linen, brown, grey and even blue. In this case I opted for white, mainly because I already intended to use those other colours across the set of figures. The base coat is the Second Shadow from the Andrea White Set and the first highlight is the Base from the same set. Both these paints benefit from being applied in two thin coats and make sure you leave adequate drying time between each coat. The second highlight is Vallejo White (VMC951) which can be an awkward paint to work with but gives a nice bright result for which I have a weakness. A few tips for using this paint are shake it really thoroughly, be prepared to use more than one coat to build up coverage, don’t overwork the paint and let it dry completely between coats to avoid the risk of a chalky finish.

Lastly, we come to the drummer. It’s important to remember that he’s an artillery drummer, so white trousers are not really appropriate. Most reliable illustrators show artillery drummers wearing blue trousers though one of Rousselot’s plates (Planche 55, Artillerie a Pied, 1805-1815 (II)) shows a drummer in Imperial Livery wearing green trousers, so that would make a nice variation for you to consider. I painted my drummer’s trousers blue using the same paints that I used for the Marie Louise’s pokalem. Drum aprons were white leather, so I used the same paints as described for the white trousers above.

After all that work it may seem odd to choose to obscure it by painting over mud effects but I always try the represent soldiers as they would have appeared on campaign. I know of several other painters who also apply mud effects and most of them seem to go for random relatively uncontrolled techniques like flicking a loaded paint brush to splatter the figures with brown paint. That way of doing things isn’t for me – I like to know precisely where the paint is going to be placed on my figures. So I actually paint on areas of mud very deliberately. I use a Vallejo Burnt Umber (VMC941) base coat, followed by Vallejo Beige (VMC875) and finally Vallejo Cork Brown (VMC843) which is one of my favourite colours in the whole range. The effect I aim for is one of mud starting to lighten as it dries out.

So that’s it for this time. In the next paint-in, I’ll turn attention to coats and jackets.

Posted in BfK Limited Edition Figures, On the Workbench, Paint and Equipment, Tutorials | Tagged: , , , | 1 Comment »

Paint-in #4: heads, hair and hats

Posted by Martin on March 17, 2013

Finished faces, hair and hats.

Finished faces, hair and hats.

So, after a brief diversion, it’s back to the painting table to finish off the faces (having done the eyes in the last painting session) and to deal with hair and hats (of various sorts).

The equipment checklist is the same as for the last session with the addition of a size 0 Da Vinci Maestro Series 10 brush. The chart below lists the paints I used in this session:

Colour Basecoat Highlight 1 Highlight 2 Highlight 3
Black Black VMC950 Dark Grey VMC994 Neutral Grey VMC992 Light Grey VMC990
Red Hull Red VMC985 Red VMC926 Carmine Red VMC908 Orange Red VMC910
Flesh Burnt Umber VMC941 Red Leather VMC818 Flat Flesh VMC955 Light Flesh VMC928
Iron Grey Field Blue VMC964 (Grey Blue VMC943) Union Blue NAC24 Azure Grey NAC17
Red Hair Burnt Umber VMC941 Cavalry Brown VMC982 Red Leather VMC818 Orange Brown VMC981
Dark Blue Andrea Blue Set 2nd Shadow Prussian Blue VMC965 Andrea Blue Set 3rd Light

In addition to those, I used Burnt Umber VMC941 and Gold VMC996 for yellow metal items; Dark Grey VMC994 and Natural Steel VMC864 for white metal items; and Old Rose VMC944 for lips.

I started with the faces and a first highlight of Red Leather over all but the deepest recesses (like eye sockets, open mouths, under the chins and so on). Remember that we already had a base coat of Burnt Umber on the faces. The next colour is Flat Flesh which again covers most of the Red Leather while trying to leave lines that represent furrows and wrinkles. The final highlight is Light Flesh which should only go on the highest points like the top of the nose, chin, cheekbones and brow. If you overdo this last step you run the risk of making your soldiers look like the undead! The finishing touch for the faces is a narrow line of Old Rose for the lower lip.

Two of the four figures in the set wear covered shakos (and a third carries one). This offers the opportunity for a choice of colours for the shako covers and, if I were doing line infantry or soldiers fighting in the Peninsular, I’d be tempted by canvas/linen shades. However, I’ve stuck to straight dark oilskin covers this time around. Before going for the shako covers themselves, I like to deal with the details on the shakos. Here that means the metal chinscales and the pompoms.

The train soldiers’ lentille pompoms are iron grey, so that’s a simple overall bascoat of Field Blue followed by successive highlights of the other colours listed above. You’ll notice that I’ve put brackets around Grey Blue in the chart. That’s because I didn’t actually use it on these pompoms – partly because I was experimenting and partly because the pompoms are so small that there’s not much benefit to be had from using a fourth colour. The artillery drummer has a nice bright red tufted pompom for which I mostly followed my traditional red palette but using Carmine Red instead of Scarlet for the second highlight. At the moment, I favour this approach because there’s a slightly more obvious difference between the Carmine Red and the Orange Red. For the chinscales, I basecoat in a dark non-metallic shade and then paint the metallic colour over the top. If it needs it, I then use an extremely watered down wash of the non-metallic colour and retouch with the metallic colour for highlights.

Black can be a very difficult colour to highlight effectively. Luckily, these shako covers are a relatively small area, Peter has sculpted plenty of folds into them and they’re the kind of item that I think gets dusty and faded. All that makes highlighting with increasingly lighter shades of grey quite forgiving though the important thing is to avoid making the whole look grey rather than black. To ensure this doesn’t happen, I leave plenty of the black basecoat showing through and, after the final highlight, this is one of the few occasions when I’d recommend some judicious blacklining.

That leaves us with one of my favourite uniform items from the Bardin regulations: the pokelem, which replaced the previously used bonnet de police as the forage cap. Many Marie-Louise’s didn’t receive a proper shako and had to make do with the pokelem instead though I suspect it was a more comfortable item to wear and had the benefit of fold-down flaps to keep the ears warm. The colours I used for the red and blue are listed above. Of note here is that I strongly recommend the 2nd Shadow from the Andrea Blue Set. It gives a dead matt and truly deep dark blue which is an ideal starting point for French blue – more of this in later paint-in sessions. The second point to note is my approach to the piping. I paint the piping first and I don’t worry too much if the lines are too thick or wobbly to begin with as I work up through the successive highlights. Once I’ve done that, I then paint up to the line of piping that I want with the blue basecoat. It’s much easier to get a consistent, neat thin line of piping that way round. Once I’m happy with the piping, I then go on to the highlights for the blue.

While I’m doing the pokalem’s piping, I also tackle the regimental number that typically appeared in red in the middle of the front panel. Let’s face it, it’s too small to attempt to paint actual numbers, so don’t bother! Simply paint a small red patch to give the impression of a number being present.

To finish up, I’ll leave you with a relevant video that Toby Thornton of Artmaster Studio posted recently on YouTube. It’s serendipitously appropriate and well worth watching. The approach to face painting is broadly similar to mine apart from using a slightly different palette of colours and tackling the eyes last rather than first. In the next paint-in session, I’ll turn my attention to trousers and footwear.

 

Posted in BfK Limited Edition Figures, On the Workbench, Paint and Equipment, Tutorials | Tagged: , , , , , , | 6 Comments »

Paint-in #3: a slight diversion

Posted by Martin on March 3, 2013

This is by way of being a small interlude to address a potentially thorny little topic that we’ll run into later on in painting the BfK Limited Edition figures. I thought that by covering it now, it would give you all advance notice. So what is this strange little diversion all about? Well, it’s another case of the French penchant for highly poetic if awkward names for the colours of cloth they used in their uniforms. You may have run into some examples before like “lie de vin”, “aurore”, “capuchin” and so on. The one that concerns us now is “gris de fer” because it is the main colour of the uniforms of French soldiers of the artillery train (and the baggage train too – more of this below).

Translation of the name of this colour into English presents only a modest challenge: it simply means “iron grey”. But that’s where the fun starts. What exactly is iron grey and how can we represent it when we we wield our paintbrushes? Let’s start by looking at the first of those two questions. Gris de fer is generally regarded as a grey-blue colour not dissimilar to sky blue but duller (or, dare I say it, greyer). Finding good trustworthy examples to inform us about what this actually looked like isn’t easy because few uniformologists and books pay much attention to backwaters such as soldiers of the train. Luckily, two of the very best have devoted some of their energies to this subject.

Let’s start with Knotel. There are two plates of interest: Band XVI, Plate 34, which depicts a trumpeter of the artillery train in 1812-13 (and, perhaps more interestingly for this posting, shows a number of artillery train soldiers in the background), and Band XVIII, Plate 29, which shows baggage train soldiers from 1807. Life isn’t helped by sky blue still often being in use instead of iron grey in 1813 but you can get the idea of things from these two – both shown for your delight below:

Knotel Band XVI Plate 34: French artillery train trumpeter 1812-13.

Knotel Band XVI Plate 34: French artillery train trumpeter 1812-13.

Knotel Band XVIII Plate 29: French baggage train soldiers 1807.

Knotel Band XVIII Plate 29: French baggage train soldiers 1807.

What I can’t show here, for copyright reasons, are the Rousselot plates covering the artillery train. These go into much greater depth and show a wide range of detailed uniform variants but, for the purposes of this discussion, iron grey is shown as a bluer and darker colour – frankly much closer to sky blue.

Of course, we also have to put these colours in the context of real life on campaign in the early part of the 19th Century: dyes were organic rather than chemical, there was no centralised supply system so individual local factories produced uniforms and campaign conditions were harsh. All of which would have led to tremendous colour differences in supplied uniforms that was only made even more variable by the effects of sun, rain and wind.

So, on to the second question: how to choose paints for iron grey. First, I’d like to point out that you have the legitimate option of clothing your artillery train soldiers in sky blue for which there are already easy paint choices (several Vallejo colours conveniently identify themselves as suitable by including “sky blue” in their names and I’d recommend them). However, I’m going for the iron grey option and I know, from previous experience of trying to represent blue-grey uniform colours, that this is an awkward job – especially when you’ve got to try to find a basecoat, first highlight and second highlight (at least) that match tonally. To cut a long story short (you really don’t need to hear about all the trial and error experiments I’ve conducted) I’ve settled on four paints:

  • Basecoat: Vallejo VMC964 Field Blue – a mid-to-dark grey with the definite blue overtones that are needed for iron grey.
  • First highlight: Vallejo VMC943 Grey Blue – now, I think this one is optional and you could miss it out of your iron grey palette. Give it a go and see what you think.
  • Second highlight: Andrea NAC-24 Union Blue – Quite close in colour to the previous one but slightly my preference. But it’s a personal subjective choice.
  • Third highlight: Andrea NAC-17 Azure Grey – this is a much lighter colour, so use it sparingly for final highlights.

In the next paint-in posting, you’ll see where I’ve started to use these colours on the figures’ lentille pompoms. In the meantime, feel free to comment and share your own recipes.

Posted in BfK Limited Edition Figures, On the Workbench, Paint and Equipment | Tagged: , , , , | 2 Comments »